Fedora 21 and ARM device support

As we slowly meander our way towards the pointy end of the Fedora 21 release, with Alpha speeding up in the rear view mirror, the Fedora ARM team are starting to discuss the best way to deal with the blossoming amount of ARMv7 devices that can and do run out of the box on Fedora.

With our 3.16 kernel containing device tree blobs for 200+ devices, the Fedora 3.17 rawhide kernel already containing 230+, it’s truly impossible to actively test and support all of those devices. So much like previous releases we’ll be focusing on testing a group of “primary devices” with the remainder being considered as secondary. This doesn’t mean they won’t work, it just means they’re not necessarily a testing focus of the regular contributors or they might not be readily available to purchase.

So what makes a device primary? Well there’s a number of considerations we’ve put into the list. Firstly the device has to be widely available and well supported upstream. Some will notice that some of the devices are no longer widely available (yes Panda, Trimslice and Calxeda I’m looking at you!) and I did consider their removal from the list but given a lot of contributors have them I think it’s worthwhile keeping them around for the moment. The primary devices list won’t be release blocking, we don’t block x86 releases for specific single devices, so I don’t believe we should for ARMv7 either.

Astute readers will notice the proposed primary list of around two dozen devices is much larger than the core devices we supported in Fedora 20! YAY! is all I have to say about that 🙂

The list is not final, at the moment it’s a suggested list and one open for discussion to some degree and what we’ll be heading from Alpha to Beta with. I fully expect it to be tweaked as we go along, there might be cool new shiny Chromebooks 😉 that arrive on the scene and end up working nicely and are hence worth actively supporting (no EXYNOS Chromebooks I’m not looking at you!) and some devices on the list below that end up not making the grade. One thing is for sure the grade includes that they support Cute Embedded Nonsense Hacks ie DeviceTree… there’s no board support here.

Primary:

• Wandboard (all models/revisions)
• Utilite (all models)
• Cubox-i (all models)
• Hummingboard (all models)
• RIoTBoard
• BeagleBone Black
• Tegra K1 Jetson
• CubieBoard (all models)
• Banana Pi
• Trimslice
• PandaBoard (all models)
• Calxeda Highbank/Midway
• VExpress (qemu)

Secondary:

• BeagleBone White
• Beagle xM
• Novena
• UDOO
• AC100
• Qualcomm (IFC6410, DragonBoard)
• Various Marvell devices (Mirabox, AX3, CuBox)
• Various Exynos devices
• Other AllWinner devices (as per available u-boot/DT support)
• Gumstix Overo series of devices
• OMAP5 EVM
• STE SnowBall

ARM64:

• AMD Seattle
• APM Mustang
• VExpress (qemu)

So what can a user expect from the primary devices above? Will all the functionality of a device work? Well it depends on the specific device and the associated SoC. For example the AllWinner SoC GPU support is far from upstream so unfortunately there will be no graphical UX for those devices, the Tegra K1 support for the GPU isn’t quite there yet but we’re hoping by GA it will be. Some will be better than others in terms of certain features but for example the AllWinner devices would make good storage devices with their SoC attached SATA and Network, no ugly usb storage/network here, so they are useful to support as a primary device and can easily have feature enablement in the F-21 cycle with a “yum upgrade” to a newer kernel.

We’ll delve deeper into the specifics of each device and the final list closer to beta.