With the IoT Working Group and Edition moving forward I’ve been looking for an x86_64 device suitable for testing IoT related use cases. I was originally planning on using the MinnowBoard or Joule but given Intel has killed those product lines off it was back to the drawing board. I eventually settled on the UP², in particular I chose the UP² Pentium-4GB-32GB-PACK as it had everything I wanted in one box.
Hardware
The on paper hardware specs show a recent generation Intel Apollo Lake core, reasonable memory and storage options, an onboard FPGA, USB-3, dual ethernet and various other bits. The kit comes with options for active or passive cooling and the later the heatsink is massive, for the moment I’m running it on the passive cooling. The case is OK, I wouldn’t rave about it though. The power connector on the other hand is terrible, the PSU cable doesn’t seat well into the board and I’ve bumped it already and had it lose power, the power button is also tiny, so small in fact I mistook it for a reset button.
Fedora support
As you would expect the support in Fedora 27 is decent, accelerated 4K graphics, wired RealTek ethernet NICs, Intel m.2 PCI-e WiFI/Bluetooth, although the later is only 4.2 for IoT I would have appreciated Bluetooth 5, all work out of the box as expected. The firmware is uEFI and in theory supports secure-boot but I couldn’t work out how to turn it on in the firmware menus as it was greyed out, it also has a TPM2 module I’ve not had time to investigate. They eagle eyed would also note that I mention Fedora 27 even though Fedora 28 has been out a few days. Well for some reason F-28 doesn’t boot, I tried the network installer and the Workstation live image, they both get to the grub menu, then I get no output and nothing for a moment then it resets and we start again. I need to investigate this further but Fedora 27 Workstation livecd booted and installed fine so that’s what it’s got for the moment. Ultimately this is going to a host to test Fedora IoT so while I tested the general support this is fine.
IoT support
There’s a number of reasons I chose this particular device as an IoT test device:
- Reasonably priced with a reasonable feature set.
- Intel hasn’t killed it off yet like they’ve done with the Joule platform and Minnowboard 3 so I could actually buy it 🙂
- Multiple network interfaces, reasonable WiFi and Bluetooth support.
- Industrial IO sensors via an onboard Intel Sensor Hub. lsiio is reporting 9 sensors of various types. I’ve not checked this further yet.
- USB-3, a Raspberry Pi HAT compatible connector and other options to add IoT related functionality or interfaces.
FPGA support
I’ve not looked at the FPGA support at all. The upstream kernel now has a FPGA Manager Framework and there’s a bunch of Altera FPGA support there but I’m not sure how it maps to this device. I also have to investigate open source toolchains for FPGA bitstreams as a lot of them just aren’t, I’ll likely do the HW enablement side of things and leave the toolchain bits to people that understand them. I also have the 96boards Ultra96 board so FPGA investigation was already on my Fedora 29 To Do list, and a lot of other people seem quite interested in them of late, no idea why 😉